Version:
Self-relieving filter regulator with attached lubricator
Materials:
Body: PA 66 GF60, spring hood: POM, diaphragms and seals: NBR, container: polycarbonate
Temperature range:
-10 to +50 °C
Input pressure:
1.5 - 16 bar (model series 0: 1.5 - 12 bar)
Condensate draining:
semi-automatic**
Pressure gauge connection:
G 1/4" (model series 0: G 1/8")
Pore width in the filter:
5 µm
Media:
Compressed air, neutral gases
Advantages:
•automatic venting if there is overpressure on the secondary side,
•easy assembly of single components within a model series using coupling kits,
•Handwheel can be arrested in place by pressing it down and must be locked with a lock - please use VHS 20. Model series 0 cannot be closed,
•semi-automatic oil filling by connecting a hose at the bottom to the oil bowl (G 1/8"). Through this hose, upon pressing the oil fill button, the oil is sucked into the container (not for model series 0).
Max. condensate amount:
28 cm³
Switch panel thread:
M 36x1,5
Oil metering at 1000 l/min:
approx. 1 - 2 drops/min
Oil supply:
40 cm³
Lubricator reaction limit (at 6 bar):
90 l/min
Scope of delivery:
Air unit, including 50 mm pressure gauge
Flow:
90 to 1750 l/min, secondary relieving: 70 l/min
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU
Optional:
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC, Safety version: with upstream lockable ball valve and filler valve -Si
*Standard series, please prefer for use, since the pressure control range is universally usable, **As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.
Documents: