Straight push in fittings NPT 3/8"-1/4" (6,35 mm), IQS-LE (EPDM seal)

Item number:

IQSG 38-1/4 NPT LE

€1.18
pcs
Item description
Materials:
Body and sleeve: POM (FDA 21 CFR 177.2470, NSF/ANSI 51 & 61), retaining claw: stainless steel, seals: EPDM (FDA 21 CFR 177.2600), lubricant: Silicone grease (NSF/ANSI 51 & 61)

Temperature range:
0 to +65 °C

Operating pressure:
-0.95 to 16 bar (Ø 3/8", 1/2", 10 mm & 12 mm: max. 11 bar)*

Media:
unoiled compressed air, water, liquid foodstuffs, non-hazardous gases and liquids (no mineral oils), mild chemicals

Approvals:
Materials according to FDA & NSF/ANSI

Advantages:
•available for metric and imperial hoses, G thread,
•R-thread and NPT-thread available,
•compatible with many other manufacturers
Properties
G / R NPT 3/8"
D [mm] 1/4" (6,35 mm)
Op­er­at­ing pres­sure [bar] -0,95 to 16
Further information on IQSG38-1/4NPTLE
Weight 5,6 g / pcs
Customs duty number 39174000
RoHS compliant Yes
Manufacturer Sang-A
Documents
*For temperatures >20°C, calculate operating pressure with this correction factor: 30°C: 0.88 - 40°C: 0.77 - 50°C: 0.69 - 65°C: 0.63, example: 50°C, operating pressure = 16 bar * 0.69 = 11 bar

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available