€288.90
pcs
Item description
Description:
Self-aligning ball bearings are double row ball bearings with a hollow round outer ring. In this way it is possible to compensate for alignment errors. Self-aligning ball bearings are supplied "open" (default) or "closed and sealed" on both sides (2RS version). The 2RS version is filled at the factory with a quality grease. Open ball bearings must be lubricated externally. For the closed version, the relevant operating limits should be observed, e.g. at higher ambient temperatures.

Tolerance:
DIN 620 Standard tolerance

Bearing play:
enlarged bearing play (matches C3)

Scope of delivery:
Self-aligning ball bearings, tapered inner borehole without spring pins (please order spring pins separately)

Manufacturer:
We supply only bearings from the manufacturers SKF or FAG!

Note for replacement purchasing other brands:
Please let us know the manufacturer and the exact bearing name including the suffix.
Properties
Design 2RS sealed (contact seals)
for shaft diameter d1 (incl. clamping sleeve) [mm] 55
d [mm] 60
D [mm] 110
B [mm] 28
required spring pins H312
i [mm] 47
Further information on LA2212K2RS
Customs duty number 84821090
Manufacturer SKF / FAG
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock