Exemplary representation: Filter regulator - Multifix series 4
Schematic symbol
Exemplary representation: Filter regulator - Multifix series 4
€293.26
Quantity
pcs
Not in stock
Item description
Version: Self-relieving pressure regulator with additional filtering using the centrifugal principle and sintered filter
Materials: Body: die-cast zinc Z410 (model series 4 & 5: aluminium), spring hood: POM, diaphragms and seals: NBR, condensate container: polycarbonate
Temperature range: -10 to +60 °C
Input pressure: 1.5 - 16 bar (model series 0 when using coupling kit 1.5 - 12 bar)
Pressure gauge connection: G 1/4" (model series 0: G 1/8")
Pore width in the filter: 5 µm (model series 5: 40 µm)
Condensate draining: semi-automatic****
Media: Compressed air, neutral gases
Advantages: •Automatic venting in the event of overpressure on the secondary side, •Easy assembly of individual components using coupling kits within a model series and thread size, •Hand wheel can be locked by pressing down on it
Max. condensate amount: 87 cm³
Switch panel thread: 87 cm³
Scope of delivery: Pressure regulator including 50 mm pressure gauge
Flow: 12000 l/min **
Own air consumption: Max. 1,5 l/min
Optional: Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed without pressure (0 - 16 bar) -AMNC
*Standard series, please prefer for use, since the pressure control range is universally usable, **measured at P1=10 bar, P2=6.3 bar and 1 bar pressure drop, ****As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.