FENG-63-250-KF (34517) guide unit

Item number:

OT-FESTO001150

€967.90
pcs
Also notice our alternatives
Our alternatives (similar item) This is based on our general assessment. Please check that the item is suitable for your special operating case. If in doubt, please ask us for advice.
Guide unit for ISO15552-Ø 63mm, stroke 250mm (LE 63/250 HK)
LE 63/250 HK
Guide unit for ISO15552-Ø 63mm, stroke 250mm
You will save 28%
€705.79
Immediately available
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Properties
size 63
Stroke [mm] 250
in­stal­la­tion po­si­tion ar­bi­trary
Guide ball guide
Con­struc­tion set up Guide
am­bi­ent tem­per­a­ture [°C] -20 to 80
Max. force Fy [N] 1.260
Max. force Fy sta­tic [N] 1.600
Max. force Fz [N] 1.260
Max. force Fz sta­tic [N] 1.600
Max. torque Mx [Nm] 75
Max. torque Mx sta­tic [Nm] 95
Max. torque My [Nm] 90
Max. torque My sta­tic [Nm] 115
Max. torque Mz [Nm] 90
Max. torque Mz sta­tic [Nm] 115
Push­ing force [N] 15
Prod­uct weight [g] 6.635
Fas­ten­ing type with fe­male thread
Ma­te­r­ial in­for­ma­tion Cop­per and PTFE-​free,
RoHs com­pli­ant
Guide el­e­ment ma­te­r­ial Quenched and tem­pered steel
Hous­ing ma­te­r­ial Alu­minium wrought alloy, an­odised
Joch plate ma­te­r­ial Alu­minium wrought alloy, an­odised
Further information on OT-FESTO001150
Weight 6.635 g / pcs
Customs duty number 84821090
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available