ADVUL-40-5-P-A (156884) compact cylinder

Item number:

OT-FESTO002062

€300.27
pcs
Also notice our alternatives
Our alternatives (similar item) This is based on our general assessment. Please check that the item is suitable for your special operating case. If in doubt, please ask us for advice.
ADNGF-40-5-P-A (554248) compact cylinder (OT-FESTO026727)
554248
ADNGF-40-5-P-A (554248) compact cylinder
You will save 54%
€138.78
Immediately available
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
CDQMB40TF-5 SMC Kompaktzylinder (OT-SMC017547)
CDQMB40TF-5
CDQMB40TF-5 SMC Kompaktzylinder
You will save 64%
€108.80
Not in stock
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Compact cylinders, double acting, piston 40 mm, stroke 5 mm (NXDA 40/5)
NXDA 40/5
Compact cylinders, double acting, piston 40 mm, stroke 5 mm
You will save 53%
€144.05
Not in stock
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Properties
Stroke [mm] 5
Pis­ton di­am­e­ter 40 mm
Damp­en­ing P: Elas­tic si­lencer rings / plates double-​sided
in­stal­la­tion po­si­tion ar­bi­trary
Con­struc­tion set up Pis­ton,
pis­ton rod
Po­si­tion de­tec­tion For prox­im­ity switch
Vari­ants One-​sided pis­ton rod
Anti-​twist lock / guide Guide rod with yoke
Op­er­at­ing pres­sure [bar] 1 to 10
Prin­ci­ple of op­er­a­tion dou­ble act­ing
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:4:4]
In­for­ma­tion about op­er­at­ing and con­trol medium Oiled op­er­a­tion pos­si­ble (re­quired in fur­ther op­er­a­tions)
Cor­ro­sion re­sis­tant class KBK 2 - mod­er­ate cor­ro­sion stress
am­bi­ent tem­per­a­ture [°C] -20 to 80
Im­pact en­ergy at the end po­si­tions [J] 0,52
The­o­ret­i­cal force at 6 bar, Re­turn flow [N] 686
The­o­ret­i­cal force at 6 bar, flow [N] 754
Fas­ten­ing type With through­way bores,
With Ac­ces­sories,
Se­lec­tively:
Pneu­matic con­nec­tion G1/8
Flush screw ma­te­r­ial Zinc plated steel
Cover ma­te­r­ial Alu­minium wrought alloy
Dy­namic seals ma­te­r­ial NBR,
TPE-U(PU)
Pis­ton rod ma­te­r­ial High-​alloyed steel
Cylin­der tube ma­te­r­ial Alu­minium wrought alloy
Further information on OT-FESTO002062
Weight 600 g / pcs
Customs duty number 84123100
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available