Item description
Materials:
shock absorber body and accessory: Steel bronzing, piston rod: hardened, rust-free steel (type SC 45...: steel hard chrome plated)
Temperature range:
0°C to max. +66°C (SC 45...: -12°C to max. +66°C)
Stroke speed:
0,15 up to 3,7 m/s (Type SC²: 0,1 up to 5,7 m/s, Type SC 45...: 0,02 up to 0,46 m/s)
Fixed limit stop:
integrated
Information:
Exceeding W4: (max. energy absorbed per hour expressed in Nm/h) is possible when switched off temporarily or the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating)
Properties
Thread B |
M 25x1,5
|
Stroke [mm] |
23
|
max. Energy consumption per stroke (W3) [Nm] |
210
|
max. Energy consumption per hour (W4) [Nm] |
68000
|
effective mass (me) [KGM] |
770 - 2630
|
Spring force [N] |
11 - 33
|
A [mm] |
7,0
|
D [mm] |
106,0
|
E [mm] |
10,0
|
G [mm] |
9,6
|
I [mm] |
34,0
|
J [mm] |
4,6
|
K [mm] |
23
|
SW1 [mm] |
23
|
SW2 [mm] |
30
|
Max. axial deviation* [°] |
5
|
Clamping flange**** |
MB 25 SC2
|
Stop sleeve |
AH 25
|
Side load adapter*** |
BV 25 SC
|
Locking nut |
KM 25
|
Temperature range [°C] |
0 to +66
|
Further information on SC650EUM8
Weight | 310 g / pcs |
Customs duty number | 84879059 |
RoHS compliant | Yes |
Manufacturer | ACE |
Documents
*at higher axial deviation use side load adapters (BV), **construction type SC², Types SC 25 EUM, SC 75 EUM and SC 190 EUM are delivered without impact head
***The side load adapter can only be fitted on shock absorbers without an impact head, or if required, it must be dismantled, ****Types MB 5 SC2, MB 6 SC2, MB 8 SC2, MB 10 SC2 must be locked with nuts on the shock absorber
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.