2/2-way solenoid valve G 1/8", closed (NC) without power,24 V AC Eco

Item number:

SLP 18 ES 24VAC

€117.31
pcs
Item description
Materials:
Bodies: 1.4408, internal parts: stainless steel, seal: FKM

Temperature range:
-20°C to +120°C, ambience: max. +65 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request

Installation position:
With upright magnets

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65

Structural shape solenoid coil:
P (plug size 3)

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Properties
Ver­sion 2/2-way so­le­noid valve
Con­trol volt­age 24 V AC
func­tion closed (NC) with­out power
Thread G 1/8"
Op­er­at­ing pres­sure [bar] 0 - 13
DN [mm] 3
L [mm] 40
Kv value* [l/min] 3,2
Power con­sump­tion (AC) [VA] 22
Struc­tural shape so­le­noid coil P
Spare so­le­noid coil MAG P 24VAC
Further information on SLP18ES24VAC
Weight 380 g / pcs
Customs duty number 84812090
RoHS compliant Yes
Manufacturer EMC
Documents
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available