€505.16
pcs
Item description
Materials:
Bodies: brass, internal parts: brass / stainless steel, seal: NBR

Temperature range:
-10 °C to max. +90 °C (G 1-1/4" - G 1-1/2" and normally open (NO): -10 °C to max. +80 °C), ambient: max. +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request

Installation position:
with standing and lying magnet

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Optional:
FKM seal (-10°C to max. +130°C, G 1-1/4" - G 1-1/2": max. +80°C) -V, EPDM seal for air and hot water (-10°C to max. +120°C, G 1-1/4" - G 1-1/2": max. +80°C) -EP

Information:
These valves are always supplied with a solenoid coil and a connector plug.
Properties
Con­trol volt­age 230 V AC
func­tion open (NO) with­out power
Thread G 1"
Seals NBR
Op­er­at­ing pres­sure [bar] 0 - 16
DN [mm] 25
L [mm] 95
Kv value* [l/min] 216
Power con­sump­tion (AC) [VA] 25
Struc­tural shape so­le­noid coil D
Spare so­le­noid coil MAG D 230V
Media tem­per­a­ture [°C] -10 to +80
Further information on MO2100230V
Weight 1,8 kg / pcs
Customs duty number 84812090
Documents
  • 3D CAD file (volume model) (Only for customers that are logged in) (STP)
  • Data sheet (Print view)
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available